API Guide

NetworkDeviceFunctions — Settings
Description
This resource is used to set the new value and create job to update the attributes of the logical interface exposed by the network adapter.
URL
/redfish/v1/Systems/System.Embedded.1/NetworkAdapters/<NetworkAdapters-Id/
NetworkDeviceFunctions/<NetworkDeviceFunction-Id>/Settings
HTTP methods and privileges
Table 119. HTTP methods and privileges for the resource
HTTP method Required privilege
GET Login
PATCH Login + SystemControl
Required parameters
Table 120. Parameters for NetworkDeviceFunction Settings
Parameter Type Description
Status
MaxVirtualFunctions Int64 The number of virtual functions (VFs) that
are available for this Network Device
Function.
NetDevFuncCapabilities Collection(NetworkDeviceFunction.v1_0_0.N
etworkDeviceTechology)
Capabilities of this network device function.
NOTE: The values of
NetDevFuncCapabilities are
determined by the port that the
partition belongs to. The values of
NetDevFuncCapabilities for all the
partitions belonging to a particular
port are the same.
NetDevFuncType NetworkDeviceFunction.v1_0_0.NetworkDe
viceTechology
The congured capability of this network
device function.
FibreChannel
WWPN String The eective current World-Wide Port
Name (WWPN) of this network device
function (physical function). If an assignable
WWPN is not supported, WWPN is a read
only alias of the PermanentWWPN.
PermanentWWPN String PermanentWWPN is the permanent WWPN
address assigned to this network device
function (physical function).
Redsh resources 57