API Guide
Table 2. Eventing operations
HTTP method type Description URI Metadata reference
GET Get detailed information about
Event Service
/redfish/v1/
EventService
EventService.xml
PATCH Property Name: ServiceEnabled
Indicates whether this service is
enabled
/redfish/v1/
EventService
EventService_v1.xml
POST Register an event notication
receiver
/redfish/v1/
EventService/
Subscriptions
EventDestination.xml
DELETE Remove a subscription
/redfish/v1/
EventService/
Subscriptions/
<Subscription ID>
EventService.xml
PowerEdge FX2 and FX2s chassis management using
iDRAC Redsh
On a PowerEdge FX2/FX2s chassis, iDRAC can monitor and manage chassis components such as fans, power supplies, and so on. Redsh
service provides information about chassis components when Chassis Management and Monitoring is set to Enabled on iDRAC. This
setting allows you to monitor and manage the chassis even if the CMC is not on the network. On an FX2/FX2s CMC, ensure that the
Chassis Management at Server setting is set to Monitor or Manage and Monitor. While this feature is enabled, iDRAC also generates
Redsh notications for chassis events.
Conguring chassis management and monitoring using iDRAC
web interface
1 In iDRAC web interface, navigate to Overview > iDRAC Settings > CMC.
2 In this section, enable chassis management and monitoring from iDRAC.
Conguring chassis management and monitoring using iDRAC
RACADM
To enable chassis management and monitoring using RACADM, use the following command:
racadm set system.chassiscontrol.chassismanagementmonitoring Enabled
For more information about chassis management and monitoring, see the iDRAC User’s Guide available at dell.com/idracmanuals.
14
Redsh-based systems management