Users Guide

• QLogic QLE2662 Dual Port FC16 HBA

• QLogic QLE2662 Dual Port FC16 HBA (LP)

• QLogic QME2662 Dual Port FC16 HBA Mezzanine

• QLogic QLE2560 FC8 Single Channel HBA

• QLogic QLE2562 FC8 Dual Channel HBA

• QLogic FC8 Embedded Mezz Card QME2572

• Emulex LPe16000 Single Port FC16 HBA

• Emulex LPe16000 Single Port FC16 HBA (LP)

• Emulex LPe16002 Dual Port FC16 HBA

• Emulex LPe16002 Dual Port FC16 HBA (LP)

• Emulex LPm16002 Dual Port FC16 HBA Mezzanine

RAID

• H310 Adapter

• H310 Mini Monolithic

• H310 Mini Blades

• H310 Embedded

• H330 Adapter

• H330 Mini Monolithic

• H330 Mini and Mono

• H330 Mini Blades

• H330 Embedded

• H710 Adapter

• H710 Mini Blades

• H710 Mini Monolithic

• H710P Adapter

• H710P Mini Blades

• H710P Mini Monolithic

• H810 Adapter

• H830 Adapter

• H730P Adapter

• PERC S110

• PERC S130

Integrated Broadcom NICs are controlled by both BIOS and the settings stored on the device itself. As a result, the Boot Protocol eld in

the HII of integrated NICs has no eect; this setting is instead controlled by the BIOS on the Integrated Devices screen.

To set integrated NICs to an iSCSI or PXE boot mode, select System BIOS Settings, and then select Integrated Devices. In the list for

each embedded NIC, select the appropriate value:

• Enabled for no boot capability.

• Enabled with PXE to use the NIC for PXE boot.

• Enabled with iSCSI to use the NIC to boot from an iSCSI target.

Modifying device settings

To modify device settings using the Advanced Hardware Conguration:

Congure