Users Guide

Canceling Lifecycle Controller actions
If Lifecycle Controller causes the system to restart twice, cancel the Lifecycle Controller actions. However, if Lifecycle Controller causes
the system to restart the third time, the message Lifecycle Controller update required is displayed, you must enable
Lifecycle Controller. For more information on enabling Lifecycle Controller, see Enabling Lifecycle Controller.
CAUTION: This action cancels all tasks that are being performed by Lifecycle Controller. It is recommended that you cancel the
Lifecycle Controller actions only when absolutely necessary.
1 Press <F2> during POST.
The System Setup Main Menu page is displayed.
2 In the System Setup Main Menu page, select iDRAC Settings.
The iDRAC Settings page is displayed.
3 Select Lifecycle Controller.
4 Under Cancel Lifecycle Controller Actions, select Yes.
5 On the System Setup Main Menu page, select Finish to save the settings.
6 Select Yes to restart the system.
Using Lifecycle Controller for the rst time
After you start Lifecycle Controller for the rst time, by default the Initial Setup Wizard page is launched. Use this wizard to set up the
Language ,Keyboard Type, Network Settings, and iDRAC Network and Credentials.
Related link
Setting up Lifecycle Controller using Initial Setup Wizard
Updating rmware
Setting up Lifecycle Controller using Initial Setup Wizard
Use the Initial Setup Wizard to select the language and default keyboard settings, congure network settings, iDRAC network and
credential conguration, and view the summary of the settings.
Specifying language and keyboard type
1 Start Lifecycle Controller. For more information, see Starting Lifecycle Controller.
2 On the left pane, click Settings.
3 On the Settings pane, click Language and Keyboard. Use the up-and down-arrow keys to select options.
• From the Language drop-down menu, select the language.
• From the Keyboard Type drop-down menu, select the keyboard type.
4 Click Next to save the new settings.
Viewing Product Overview
Use this page to see the overview of Lifecycle Controller and iDRAC. Click Next to continue.
NOTE
: For more information about the product, scan the QR code provided on this page by using a supported QR reader or
scanner and navigate to www.delltechcenter.com/idrac
The Lifecycle Controller Network Settings page is displayed.
16
Using Lifecycle Controller