Reference Guide
To apply the configuration operation, create a configuration job, and then restart the server.
To create the required commit and reboot jobs, run the jobqueue command.
For more information about the jobqueue command, enter the RACADM command "racadm help
jobqueue”
swinventory
Description Displays the list of software objects and associated properties installed on a server.
NOTE: Lifecycle Controller and CSIOR may not be enabled to run this subcommand.
Synopsis
racadm swinventory
Input
racadm swinventory
Output
racadm swinventory
------------------SOFTWARE INVENTORY-------------------
ComponentType = FIRMWARE
ElementName = Power Supply.Slot.2
FQDD = PSU.Slot.2
InstallationDate = 2013-06-11T13:02:46Z
Current Version = 07.2B.7D
---------------------------------------------------------------
ComponentType = FIRMWARE
ElementName = Integrated Remote Access Controller
FQDD = iDRAC.Embedded.1-1
InstallationDate = NA
Rollback Version = 1.50.50
----------------------------------------------------------------
ComponentType = FIRMWARE
ElementName = Integrated Remote Access Controller
FQDD = iDRAC.Embedded.1-1
InstallationDate = 2013-06-11T13:02:48Z
Current Version = 1.50.50
NOTE: Conguration changes and rmware updates that are made within the operating system may not reect properly in the
inventory until you perform a server restart.
systemcong
Description
Enables you to perform the following:
• Backup and restore for iDRAC and entire system conguration.
• Automatic scheduling of backup operation.
• View the auto backup feature settings.
• Clear the auto backup feature settings.
RACADM Subcommand Details 93