Reference Guide

Input

• -d — Enables DHCP for the NIC. It is enabled by default.

• -d6 — Enables AutoCong for the NIC (default is disabled).

• -s — Enables static IP settings. The IPv4 address, netmask, and gateway must be specied. Otherwise, the

existing static settings are used. <ipaddress>, <netmask>, and <gateway> must be typed as dot-

separated strings.

racadm setniccfg -s 192.168.0 255.255.255.0 192.168.0

•

-s6 — Enables static IPv6 settings. The IPv6 address, Prex Length, and the IPv6 Gateway can be specied.

• -o — Enable or disable NIC.

Example

• To Congure static IPv4 address for iDRAC NIC

racadm setniccfg -s 192.168.0 255.255.255.0 192.168.0

Static IP configuration enabled and modified successfully

• Congure DHCP mode for iDRAC IPv4

racadm setniccfg -d

DHCP is now ENABLED

• Congure DHCP mode for iDRAC IPv6

racadm setniccfg -d6

DHCP6 is now ENABLED

sshpkauth

Description Enables you to upload and manage up to 4 dierent SSH public keys for each user. You can upload a key le or key

text, view keys, or delete keys.

This command has three mutually exclusive modes determined by the options — upload, view, and delete.

To run this subcommand, you must have Congure user privilege.

NOTE: CMC does not support DSA algorithm.

Synopsis

• racadm sshpkauth -i svcacct -k <key_index> -p <privilege> -t <PK_key_text>

• racadm sshpkauth -i svcacct -k <key_index> -p <privilege> -f <PK_key_text>

• racadm sshpkauth -v -i svcacct -k all|<key_index>

• racadm sshpkauth -d -i svcacct -k all|<key_index>

Input

• -i <user_index> — Index for the user.

• -k [<key_index> | all] — Index to assign the PK key being uploaded. all only works with the -v or -d

options. <key_index> must be between 1 to 4 or all on iDRAC.

• -t <PK_Key_Text> — Key text for the SSH Public key.

• -f <filename> — File containing the key text to upload.

NOTE: The -f option is not supported on Telnet or SSH or serial RACADM.

• -v — View the key text for the index provided.

• -d — Delete the key for the index provided.

Example

• Upload an invalid key to iDRAC User 2 in the rst key space using a string.

$ racadm sshpkauth -i 2 -k 1 -t "This is invalid key

Text"

ERROR: Key text appears to be corrupt

RACADM Subcommand Details