Reference Guide

• Audit
• -b — The subcategory used to lter the records. Provides multiple subcategories using a "," as the delimiter.
• -q — The sequence number from which the records must be displayed. Records older than this sequence
number is displayed.
NOTE: This parameter input is an integer. If an alphanumeric input is provided, then invalid
subcommand syntax error is displayed.
• -n — Species the n number of records that must be displayed. On Local RACADM, if this parameter is not
specied, by default 100 logs are retrieved.
• -r — Displays events that have occurred after this time. The time format is yyyy-mm-dd HH:MM:SS. The time
stamp must be provided within double quotation marks.
• -e — Displays events that have occurred before this time. The time format is yyyy-mm-dd HH:MM:SS. The
time stamp must be provided within double quotation marks.
• -f <filename> — Species the le location and name where lifecycle log is exported.
• -a <name> — Species the FTP Server IP address or FQDN, user name, and password.
• -l <location> — Species the location of the network share or area on le system where lifecycle log is
exported. Two types of network shares are supported:
• SMB-mounted path: //<ipaddress or domain name>/<share_name>/<path to image>
• NFS-mounted path: <ipaddress>:/<path to image>.
• -u <user> — Species the user name for accessing the FTP server, or Domain and user name for accessing
network share location.
• -p <password> — Species the password for accessing the FTP server or share location.
• -s — The severity used to lter the records. Provide multiple severities using a "," as the delimiter. The value is
case-insensitive. Valid Severity values:
• Warning
• Critical
• Info
• —m <Comment> — User comment string for a record that must be inserted in the Lifecycle Controller log. This
comment string must be less than 128 characters. The text must be specied within double quotation mark.
NOTE
: HTML-specic characters may appear as escaped text.
• -m <Worknote> — Adds a worknote (an entry) in the Lifecycle log. This worknote must be less than 256
characters. The text must be specied within double quotation mark.
NOTE
: HTML-specic characters may appear as escaped text.
NOTE: For -m <worknote> and —m <comment> options, you need test alert privilege.
• --complete — Export the complete Lifecycle log as a compressed le. The exported le will be of the
type
.xml.gz.
• -j<Job ID> — Species the Job ID.
Example
• Display the number of records present in the Lifecycle log.
racadm lclog view -i
• Display the iDRAC agent idrac records, under the storage category and storage physical disk drive
subcategory, with severity set to warning.
racadm lclog view -a idrac -c storage -b pdr -s warning
•
Display the records under storage and system categories with severities set to warning or critical.
racadm lclog view -c storage,system -s warning,critical
•
Display the records having severities set to warning or critical, starting from sequence number 4.
racadm lclog view -s warning,critical -q 4
• Display 5 records starting from sequence number 20.
racadm lclog view -q 20 -n 5
• Display all records of events that have occurred between 2011-01-02 23:33:40 and 2011-01-03 00:32:15.
racadm lclog view -r "2011-01-02 23:33:40" -e "2011-01-03 00:32:15"
56 RACADM Subcommand Details