Reference Guide

switch-1 MXL 10/40GbE X01 9-2(0-296)

switch-2 M8024-k 10GbE SW A00 5.0.1.3

switch-3 Dell PowerConnect M8024 X00

switch-4 Dell PowerConnect M8024 X00

switch-5 Dell PowerConnect M6348 X02

switch-6 Dell PowerConnect M6220 A01

hwinventory

Description Allows you to display or export current internal hardware inventory or shipped hardware inventory by device.

NOTE: iDRAC supports a maximum of 12 parallel sessions of hardware inventory.

Synopsis

• racadm hwinventory

• racadm hwinventory NIC|FC

• racadm hwinventory <FQDD>

• racadm hwinventory export -f <filename> -u <username> -p <password> -l <CIFS

or NFS share>

Input

• <FQDD> — Species the FQDD of the target device.

• FQDD — NIC.Slot.1–2

• -f — Exported Hardware Inventory lename.

• -u — Username of the remote share to where the le must be exported. Specify user name in a domain as

domain/username

• -p — Password for the remote share to where the le must be exported.

• -l — Network share location to where the Hardware Inventory must be exported.

Examples

• To get the list of NIC FQDDs, type the following command:

racadm hwinventory nic

NIC.Slot.2-1-1:Emulex OCe14102-U1-D - 00:90:FA:4C:FE:C2

PartitionCapable : 1

NIC.Slot.2-1-2:Emulex OCe14102-U1-D - 00:90:FA:4C:FE:C3

PartitionCapable : 2

NIC.Slot.2-1-3:Emulex OCe14102-U1-D - 00:90:FA:4C:FE:C4

PartitionCapable : 3

NIC.Slot.2-1-4:Emulex OCe14102-U1-D - 00:90:FA:4C:FE:C5

PartitionCapable : 4

• To display the statistics for the NIC FQDD, type the following command:

$racadm hwinventory <NIC FQDD>

Total RDMA Packets Received: 0

Total RDMA Packets Transmitted: 0

RACADM Subcommand Details