Reference Guide
System Board 2.5V
AUX PG
Ok Good NA NA
CPU1 M01 VDDQ PG Ok Good NA NA
System Board NDC
PG
Ok Good NA NA
CPU1 M01 VPP PG Ok Good NA NA
System Board 1.5V
PG
Ok Good NA NA
System Board PS2
PG Fail
Ok Good NA NA
System Board PS1
PG Fail
Ok Good NA NA
System Board 1.5V
AUX PG
Ok Good NA NA
CPU1 M01 VTT PG Ok Good NA NA
PS1 Voltage 1 Ok 240 V NA NA
System Board DIMM
PG
Ok Good NA NA
Sensor Type : CURRENT
<Sensor Name>
<Status> <Reading> <lc> <uc> <Inc> [R/W] <unc> [R/W]
PS1 Current
1
Ok 0.4 Amps NA NA 0 Amps [N] 0 Amps [N]
System Board
Pwr
Consumption
Ok 56 Watts NA 1386 Watts 0 Watts [N] 1260 Watts
[N]
Sensor Type : PROCESSOR
<Sensor Name>
<Status> <State> <lc> <uc>
CPU1 Status Ok Presence Detected NA NA
CPU2 Status N/A Absent NA NA
Sensor Type : MEMORY
<Sensor Name>
<Status> <State> <lc> <uc>
Sensor Type : Chassis Controller
<Sensor Name>
<Status> <State>
Chassis Controller OK OK
/tmp # vi idraclogs
4 23:09:39 idrac8 L4, S3 [2440]: sessionmanagement_dmmapping_thread() confd (2)
4 23:09:39 idrac8 L4, S3 [2440]: request.command is 13
4 23:09:39 idrac8 L4, S3 [10297]: AddMessageToLclogEI() Obtained MUT Flag
4 23:09:39 idrac8 L4, S3 [10297]: ___ AddMessageToLclogEI : DCLCLWRAPCreateTLVLi
4 23:09:39 idrac8 L4, S3 [10297]: GetSledType() shmStatus 0 shmData0
4 23:09:39 idrac8 L5, S3 [10297]: RacadmcheckRSMStatus: This is RSM capable syst
4 23:09:40 idrac8 L4, S3 [10297]: ret is 0
42
RACADM Subcommand Details