Reference Guide

getsel

Description

Displays all system event log (SEL) entries in iDRAC.

Synopsis

• racadm getsel [-i] [-m <module>]

• racadm getsel [-s <start>][-c <count>] [-m <module>] [--more]

NOTE: If no arguments are specied, the entire log is

displayed.

Input

• —i — Displays the number of entries in the SEL.

• -s — Displays the starting record number.

• -c — Species the number of records to display.

• -m <module> — Must be one of the following values:

• server-<n> : where n = 1–16

• server-<nx> : where n = 1–8; x = a, b, c, d (lower case)

• --more — Displays one screen at a time and prompts the user to continue (similar to the UNIX more

command.)

Example

• Display entire log.

racadm getsel

• Display number of records in log.

racadm getsel -i

getsensorinfo

Description

Displays the status for system sensors.

NOTE: For Dell PowerEdge FX2 chassis with FM120x4 server, the power related information is not

displayed.

NOTE: General purpose graphical processing unit (GPGPU) status is displayed only on PowerEdge

C4130 servers.

Synopsis

• racadm getsensorinfo

• racadm getsensorinfo -c

Input -c — Compact output format.

NOTE: Chassis Controller is supported only on Dell PowerEdge FX2 and GPU sensors are displayed only on PowerEdge C4130

servers.

Example

1 IO-Cable OK

2 FPC-Cable OK

racadm getsensorinfo

Sensor Type : POWER

RACADM Subcommand Details