Reference Guide

Default Value Not Applicable
Write Privilege
Congure iDRAC
License Required
iDRAC Express or iDRAC Enterprise
Dependency
None
iDRAC.Security.FIPSMode (Read or Write)
Description Enables or disables the FIPS mode compliance. Enabling FIPS mode resets iDRAC conguration to factory defaults
Legal Values
• 1 - Enabled
• 0 - Disabled
Default Value 0 - Disabled
Write Privilege Congure iDRAC
License Required iDRAC Express or iDRAC Enterprise
Dependency None
NOTE: Setting FIPSMode to 0 - Disabled, will not have any
eect.
NOTE: To disable FIPSmode, reset the iDRAC to factory default setting ( racadm racresetcfg).
NOTE: If FIPS is enabled, you cannot perform any actions associated with the vFlash SD card, such as conguring the vFlash SD
card, exporting or backing up server prole to the vFlash, or importing server prole using vFlash.
iDRAC.Serial
The objects in this group provide conguration parameters for the serial interface of iDRAC.
NOTE
: This is supported only for rack and tower systems.
iDRAC.Serial.BaudRate (Read or Write)
Description
Sets the Baud rate on the iDRAC serial port.
Legal Values
• 9600
• 19200
• 57600
• 115200
Default Value
115200
Write Privilege
Congure iDRAC
License Required
iDRAC Express or iDRAC Enterprise
Database Objects With Get and Set Commands 281