Reference Guide

If this property is enabled when the host server is rebooted, this feature attempts to start from the virtual media
devices — if the appropriate media is installed in the device.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgVirMediaFloppyEmulation (Read or Write)
Description
When set to 0, the virtual oppy drive is recognized as a removable disk by Windows operating systems. Windows
operating systems assigns a drive letter that is C: or higher during enumeration. When set to1, the Virtual Floppy
drive is seen as a oppy drive by Windows operating systems. Windows operating systems assigns a drive letter of
A:
or B:.
NOTE: Virtual Media has to be reattached (using cfgVirMediaAttached) for this change to take
eect.
Legal Values
• 1 (TRUE)
• 0(FALSE)
Default
0
cfgSDWriteProtect (Read Only)
Description
Displays if the physical write protect latch on the SD card is enabled or disabled.
NOTE: This command is deprecated from 12G iDRAC 1.0 release onwards. The functionality of this
command is covered by cfgVFlashSDWriteProtect. While execution of the cfgSDWriteProtect command
is successful, use the cfgVFlashSDWriteProtect command. For more information, see
cfgVFlashSDWriteProtect Read Only.
Legal Values
• 1 (TRUE)
• 0(FALSE)
Default
0
cfgServerInfo
This group allows you to select the BIOS rst boot device and provides the option to start the selected device only once.
Use this object with the cong or getcong subcommands.
The following sections provide information about the objects in the cfgServerInfo.
iDRAC Property Database Group and Object Descriptions
133