Reference Guide

Default
57600
cfgSerialConsoleEnable (Read or Write)
Description
Enables or disables the serial console interface.
Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgSerialConsoleQuitKey (Read or Write)
Description
This key or key combination terminates Virtual Console text for iDRAC when using the console com2 command.
Legal value: ^ follows any alphabet (a-z, A-Z) ^ follows the listed special characters: [ ] \ ^ _
NOTE: The CTRL key is represented by using the ^ (carat) character.
NOTE: The CTRL key does not generate a character by itself, but must be struck simultaneously with
another key to generate a character.
For example, striking both the CTRL key and the \ key simultaneously (rather than sequentially) is denoted as ^\.
Conguration options: The value must start with the ^ character, and must follow one of the characters — a-z, A-Z,
[,], \
In the input command, use \ without the quotes. For example:
config -g cfgSerial -o cfgSerialConsoleQuitKey "SHIFT+6"\\
Default: <Ctrl> \
cfgSerialConsoleIdleTimeout (Read or Write)
Description
The maximum number of seconds to wait before an idle serial session is disconnected.
Legal Values
• 0 = No timeout
• 60–1920
Default
300
cfgSerialConsoleNoAuth (Read or Write)
Description
Enables or disables the serial console login authentication.
Legal Values
• 0 — (enables serial login authentication)
iDRAC Property Database Group and Object Descriptions 123