Reference Guide
After the message is displayed, the system returns to the shell that generated the Secure Shell session.
Legal Values
• 0 —(No timeout)
• 60–10800
NOTE: If 0 (no timeout), the network connection does not send alive packets to probe the client.
Otherwise, keep alive packets are sent to guarantee that the client is responding.
Default
• For iDRAC on Rack and Tower Servers: 300
• For iDRAC Enterprise on Blade Servers: 1800
cfgSsnMgtTelnetIdleTimeout (Read or Write)
Description
Denes the Telnet idle timeout. This property sets the amount of time in seconds that a connection is allowed to
remain idle (there is no user input). The session is canceled if the time limit exceeds this property. Changes to this
setting do not aect the current session (you must log out and log in again to make the new settings eective.)
An expired Telnet session displays the following error message:
• For iDRAC on Rack and Tower Servers: Connection timed out
• For iDRAC Enterprise on Blade Servers: Session timed out. Closing the session.
After the message is displayed, the system returns you to the shell that generated the Telnet session.
Legal Values
• 0 (No timeout)
• 60–10800
NOTE: If 0 (no timeout is specied), the network connection does not send alive packets to probe
the client. Otherwise, keep alive packets are sent to guarantee that the client is responding.
Default
• For iDRAC on Rack and Tower Servers: 300
• For iDRAC Enterprise on Blade Servers: 1800
cfgSerial
This group contains conguration parameters for the serial conguration. One instance of the group is allowed.
Use this object with the cong or getcong subcommands.
The following sections provide information about the objects in the cfgSerial group.
NOTE
: The cfgSerial object group is applicable for iDRAC Enterprise on Blade Servers for only two properties —
cfgSerialTelnetEnable=1 and cfgSerialSshEnable=1.
cfgSerialBaudRate (Read or Write)
Description
Sets the baud rate on the serial port.
Legal Values
9600, 19200, 57600, 115200
122 iDRAC Property Database Group and Object Descriptions