Reference Guide

InstallationDate = NA
Rollback Version = 1.50.50
----------------------------------------------------------------
ComponentType = FIRMWARE
ElementName = Integrated Remote Access Controller
FQDD = iDRAC.Embedded.1-1
InstallationDate = 2013-06-11T13:02:48Z
Current Version = 1.50.50
NOTE: Configuration changes and firmware updates that are made within the operating system may not reflect properly in
the inventory until you perform a server restart.
systemconfig
Description Enables you to perform the following:
● Backup and restore for iDRAC and entire system configuration.
● Automatic scheduling of backup operation.
● View the auto backup feature settings.
● Clear the auto backup feature settings.
NOTE:
● To run this subcommand, you require the Server Profile Export and Import license.
● Backup operation is licensed (Enterprise) but restore operation is not licensed.
● If Lifecycle Controller is disabled, starting a restore operation is unsuccessful.
● If CSIOR is disabled, the system inventory can have old data during the backup operation. An
appropriate warning message is displayed.
● The autobackupscheduler can be enabled or disabled. For more information about enable or
disable, see LifecycleController.LCAttributes.autobackup
● The minimum Lifecycle Controller version 1.3 is required.
Synopsis
● racadm systemconfig backup -f <filename> <target> [-n passphrase] [-l
<location> -u <user name> -p <password>] [--vFlash]
●
racadm systemconfig restore -f <filename> <target> [-n passphrase ] [--
nopreserve] [-l <location> -u <user name> -p <password>] [--vFlash]
● To create an AutoBackup Schedule.
racadm systemconfig backup [-f <filename>] <target> [-n <passphrase>][-
l <location> -u <user name> -p <password>] [--vFlash] -time <time> [-
dom <DayOfMonth>] [-wom <WeekOfMonth>] [-dow <DayofWeek>] -rp <repeat>
-mb <MaxBackup>
● To view an AutoBackup Schedule.
racadm systemconfig getbackupscheduler
● To delete an AutoBackup Schedule.
racadm systemconfig clearbackupscheduler
NOTE: After the parameters are cleared, the AutoBackupScheduler is disabled. To schedule the
backup again, enable the AutoBackupScheduler.
Input
● -n — Specifies a pass phrase used to encrypt or decrypt the configuration data. The pass phrase must
have 8 to 32 characters, and one upper and lower case character.
NOTE: This pass phrase is optional.
● -l — Specifies the network share location, can be either CIFS or NFS.
RACADM Subcommand Details 99