Reference Guide

Table Of Contents
ReadPolicy Read Ahead
WritePolicy Write Back
StripeSize 64K
DiskCachePolicy Default
BadBlocksFound NO
Secured NO
RemainingRedundancy 0
EnhancedCache Not Applicable
T10PIStatus Disabled
BlockSizeInBytes 512
â—‹
To generate and view information about the inventory of storage enclosures connected to the connector.
This command displays all enclosure objects for the connector FQDD.
racadm storage get enclosures -o
Enclosure.Internal.0-1:RAID.Integrated.1-1
Status Ok
State Ready
DeviceDescription Backplane 1 on Connector 0 of Integrated
RAID Controller 1
RollupStatus Ok
Name BP13G+EXP 0:1
BayId 1
FirmwareVersion 0.23
SasAddress 0x500056B31234ABFD
SlotCount 24
The following command displays all enclosure keys connected to the connectors:
racadm storage get enclosures --refkey RAID.Integrated.1-1
Enclosure.Internal.0-1:RAID.Integrated.1-1
The following command is an optimized and filtered version:
racadm storage get enclosures --refkey RAID.Integrated.1-1 -o -p Name
Enclosure.Internal.0-1:RAID.Integrated.1-1
Name = BP12G+EXP 0:1
92
RACADM Subcommand Details