Reference Guide

Table Of Contents
1 SSL key used to generate the server certificate.
-f Specifies the filename of the SSL key that must be uploaded.
Output If upload is successful, the message SSL key successfully uploaded to the RAC is displayed. if
upload is unsuccessful, error message is displayed.
Example
racadm sslkeyupload -t 1 -f c:\sslkey.txt
sslresetcfg
Description Restores the web-server certificate to factory default and restarts web-server. The certificate takes effect
30 seconds after the command is entered.
To run this subcommand, you must have the Configure iDRAC privilege.
Synopsis
racadm sslresetcfg
Input N/A
Example
racadm sslresetcfg
Certificate generated successfully and webserver restarted.
storage
Description
Allows you to run the commands to control storage arrays.
To run this subcommand for configuring the storage properties, you must have the server control
permission.
Synopsis
Inventory
To view the help details for get command, run the following command:
racadm storage help get
To generate and view information about the inventory of storage root node, run the following
command:
racadm storage get status
To generate and view information about the inventory of controllers, run the following command:
racadm storage get controllers -o
racadm storage get controllers -o -p <property names separated by comma>
To get the list of controllers, run the following command:
racadm storage get controllers
To get the properties of PCIeSSD controller, run the following command:
racadm storage get controllers:<PcieSSD controller FQDD>
RACADM Subcommand Details 81