Reference Guide

● —r <reboot type> — Specifies a reboot type.
○ none — No Reboot Job. This option is the default value.
○ pwrcycle — Power cycle.
○ graceful — Graceful Reboot without forced shut down.
○ forced — Graceful Reboot with forced shut down.
● start time — Specifies a start time for job scheduled in the yyyymmddhhmmss
format. TIME_NOW means immediate. Next Reboot means job is in scheduled state until
the next manual restart.
● expiry time — Specifies expiry time for the job execution in the yyyymmddhhmmss
format. The job must start by this time. TIME_NA means expiry time is not applicable.
●
--realtime — Specifies the real time job.
NOTE:
○ --realtime is applicable for storage configuration commands run on systems
with PERC 9 cards with firmware version 9.1 and later.
○ -r option is not valid for real time configuration.
Example
● View jobs in the current job queue.
racadm jobqueue view
● View status of a specific job ID.
racadm jobqueue view -i <JobID>
● Issue configuration changes for a PERC controller then start a real time job to execute
the changes.
racadm set RAID.Slot.3-1.RAIDdefaultWritePolicy WriteBack
racadm set RAID.Slot.3-1.Name “Prod Workload”
racadm jobqueue create RAID.Slot.3-1 –realtime
● Delete all possible jobs from the current job queue.
racadm jobqueue delete --all
● Delete a specific job from the current job queue.
racadm jobqueue delete -i <JobID>
● To clear all the jobs in the job queue.
racadm jobqueue delete –i JID_CLEARALL
● Create a Job for the provided FQDD and add to the job queue.
racadm jobqueue create NIC.Integrated.1-1 -r pwrcycle -s
TIME_NOW -e 20120501100000
● Create a real time configuration job for the specified RAID controller.
racadm jobqueue create RAID.Integrated.1-1 -s TIME_NOW --
realTime
RAC1024: Successfully scheduled a job.
Verify the job status using "racadm jobqueue view -i
JID_xxxxx" command.
Commit JID = JID_927008261880
krbkeytabupload
Description
Uploads a Kerberos keytab file to iDRAC.
RACADM Subcommand Details 55