Reference Guide

● If the-dom option is non-'*', then the schedule repeats by month.
● If the-wom option is non-'*', then the schedule repeats by month.
● If the-dom and -wom options are '*' and the -dow option is non-'*', then the schedule repeats by
week.
● If all the three -dom, -wom and -dow options are '*', then the schedule repeats by day.
● -rp — Specifies the repeat parameter. This parameter must be specified.
○ If the-dom option is specified, then the valid values for -rp are 1–12.
○ If the-wom option is specified, then the valid values for -rp are 1–52.
○ If the-dow option is specified, then the valid values for -rp are 1–366.
● -a — Applies reboot (1 — Yes, 0 — No). This option must be specified.
Example Usage examples:
● To configure autoupdate feature settings.
○ For CIFS, run the command:
racadm autoupdatescheduler create -u domain/admin -p xxx -l //
1.2.3.4/share -f cat.xml -time 14:30 -wom 1 -dow sun -rp 1 -a 1
○ For NFS, run the command:
racadm autoupdatescheduler create -u nfsadmin -p nfspwd -l
1.2.3.4:/share -f cat.xml -time 14:30 -dom 1 -rp 5 -a 1
○
For FTP, run the command:
racadm autoupdatescheduler create -u ftpuser -p ftppwd -l
ftp.test.com -f cat.xml.gz -ph 10.20.30.40 -pu padmin -pp ppwd -po
8080 -pt http -time 14:30 -dom 1 -rp 5 -a 1
○ For HTTP, run the command:
racadm autoupdatescheduler create -u httpuser -p httppwd -l
http://test.com -f cat.xml -ph 10.20.30.40 -pu padmin -pp ppwd -
po 8080 -pt http -time 14:30 -dom 1 -rp 5 -a 1
○ For TFTP, run the command:
racadm autoupdatescheduler create -l tftp://1.2.3.4 -f cat.xml.gz
-time 14:30 -dom 1
-rp 5 -a 1
○ To view AutoUpdateScheduler parameter:
racadm autoupdatescheduler view
hostname = 192.168.0
sharename = nfs
sharetype = nfs
catalogname = Catlog.xml
time = 14:30dayofmonth =1
repeat = 5
applyreboot = 1
idracuser = racuser
○ To clear and display AutoUpdateScheduler parameter:
racadm autoupdatescheduler clear
RAC1047: Successfully cleared the Automatic Update (autoupdate)
feature settings
cd
Description
To change the current working object, use this command.
RACADM Subcommand Details 21