Reference Guide

To view the properties of this group, enable the vFlash using the command:
racadm config -g cfgvFlashSD -o cfgvFlashSDEnable 1
The following sections provide information about the objects in the cfgVFlashSD group.
cfgVFlashSDInitialized (Read Only)
Description
Displays whether an SD card is initialized.
Legal Values
● 0
● 1
Default
None
cfgVFlashSDEnable (Read or Write)
Description
Enables or disables the vFlash SD card.
NOTE: Disabling vFlashPartition by setting cfgVFlashSDEnable to 0 does not require a
license.
Legal Values
● 0 (Disable)
● 1 (Enable)
Default
1
cfgVFlashSDSize (Read Only)
Description
Displays the size of the vFlash SD card in megabytes (MB).
Legal Values
A string of up to 64 characters.
Default
<card size>
cfgVFlashSDLicensed (Read Only)
Description
Displays whether an SD card or vFlash SD card is inserted. The vFlash SD card supports the new enhanced
vFlash features and the SD card supports only the limited vFlash features.
Legal Values
● 0(SD card is inserted)
● 1(vFlash SD card is inserted)
Default
None
cfgVFlashSDAvailableSize (Read Only)
Description
Displays the available memory (in MB) on the vFlash SD card that can be used to create new partitions.
Legal Values
A string of up to 64 characters.
Default
If the card is not initialized, default is 0. If initialized, displays the unused memory on the card.
174 iDRAC Property Database Group and Object Descriptions