Reference Guide

Use this object with the config or getconfig subcommands.
NOTE: To apply this setting, use the -m option.
The following sections provide information about the objects in the cfgIPv6LanNetworking group.
cfgIPv6Enable (Read or Write)
Description
Enables or disables iDRAC IPv6 stack.
Legal Values
● 1 (TRUE)
● 0 (FALSE)
Default
0
cfgIPv6Address1 (Read or Write)
Description
Specifies iDRAC IPv6 address.
Legal Values
String representing a valid IPv6 entry.
Default
:
cfgIPv6Gateway (Read or Write)
Description
iDRAC gateway IPv6 address.
Legal Values
Specifies string representing a valid IPv6 entry.
Default
“ :: “
cfgIPv6AutoConfig (Read or Write)
Description
Enables or disables the IPv6 Auto Configuration option.
NOTE: If this value is set to 0, the iDRAC disables auto configuration and statically assigns IPv6
addresses. If this value is set to 1, the iDRAC obtains address and route information using stateless
auto configuration and DHCPv6.
NOTE: The iDRAC uses its MAC address for its DUID (DUID-LL) when communicating with a DHCPv6
server.
Legal Values
● 1 (TRUE)
● 0 (FALSE)
Default
0
cfgIPv6PrefixLength (Read or Write)
Description
Specifies the prefix length for IPv6 address.
NOTE:
162 iDRAC Property Database Group and Object Descriptions