Reference Guide

cfgServerCumulativePowerClear (Write Only)
Description
Clears the cfgServerCumulativePowerConsumption and
cfgServerCumulativePowerConsumptionTimeStamp values.
Legal Values
1
Default
None
cfgServerPowerPCIeAllocation (Read or Write)
Description
Amount of power allocated to the PCIe cards.
This object is applicable for iDRAC Enterprise only for specific Blade Servers and not for iDRAC on Rack
and Tower Servers.
You must have the Administrator privileges to modify the value for this object.
Legal Values
0 W: For platforms that do not support PCIe cards.
100 W — 500 W: For platforms that support PCIe cards.
Default
0: For platforms that do not support PCIe cards.
500 W: For platforms that support PCIe cards.
cfgServerPowerSupply
This group contains information related to the power supplies.
The cfgServerPowerSupply object group is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC
Enterprise on Blade Servers.
NOTE:
The getconfig subcommand always shows eight cfgServerPowerSupply indexes, even if two power
supplies are installed in the system or the system supports a maximum of two PSUs. For the uninstalled and unsupported
units, all the objects in the cfgServerPowerSupply group displays a value of 0.
The following sections provide information about the objects in the cfgServerPowerSupply group.
cfgServerPowerSupplyIndex
Description
Specifies index of the PSU.
NOTE: Indexes 1–8 are supported to support up to 8 PSUs. If any PSU is not present then
cfgServerPowerSupplyOnlineStatus does not exist and for all the other properties, it is 0.
Legal Values
Integer 1–8
Default
None
cfgServerPowerSupplyMaxInputPower (Read Only)
Description
Displays the AC input rated power in Watts.
Legal Values
A string of up to 32 characters.
160 iDRAC Property Database Group and Object Descriptions