Reference Guide

cfgRhostsFwUpdateIpAddr (Read or Write)
Description
Specifies the network TFTP server IPv4 or IPv6 address that is used for TFTP firmware update operations.
Legal Values
A string representing a valid IPv4 or IPv6 address. For example, 192.168.0.61
Default
For IPv4, it is 0.0.0.0
cfgRhostsFwUpdatePath (Read or Write)
Description
Specifies TFTP path where firmware image file exists on the TFTP server. The TFTP path is relative to the
TFTP root path on the TFTP server.
NOTE: The server may still require you to specify the drive (for example, C:).
Legal Values
A string with a maximum length of 255 ASCII characters.
Default
<blank>
cfgRhostsSmtpServerIpAddr (Read or Write)
Description
The IPv4 or IPv6 address of the network SMTP server.
The SMTP server transmits email alerts from iDRAC if the alerts are configured and enabled.
Legal Values
A string representing a valid SMTP server IPv4 or IPv6 address. For example: 192.168.0.2.
Default
For IPv4, it is 0.0.0.0
cfgRhostsSyslogEnable (Read or Write)
Description
To allow the RAC and SEL logs to be written to up to three remote syslog servers Enables or disables
remote syslog.
Legal Values
● 1 (TRUE)
● 0 (FALSE)
Default 0
cfgRhostsSyslogPort (Read or Write)
Description
Remote syslog port number to use for writing the RAC and SEL logs to a remote syslog server.
Legal Values
10–65535
Default 514
cfgRhostsSyslogServer1 (Read or Write)
Description
To store the RAC and SEL logs specify the first of three possible remote syslog servers. This property is
only valid if cfgRhostsSyslogEnable is set to 1 (enabled).
120 iDRAC Property Database Group and Object Descriptions