Reference Guide

Home key: directs to the starting of the command.
End key: directs to the end of the command.
● View the history of the commands that were run in the current session, press up and down arrow key.
● Exit the Autocomplete mode, enter Quit, Exit, or press Ctrl+D key.
For example:
● Example 1: racadm> <press tab>
arp
autoupdatescheduler
clearasrscreen
clearpending
closessn
clrraclog
.
.
.
.
.
.
.
vflashsd
vflashpartition
vmdisconnect
cd
quit
● Example 2: racadm> get <press tab>
get
getconfig
getled
getniccfg
getraclog
getractime
getsel
getsensorinfo
getssninfo
getsvctag
getsysinfo
gettracelog
getversion
● Example 3:
racadm> getl<press tab>
racadm> getled <press enter> or <racadm getled>
LEDState: Not-Blinking
● Example 4:
racadm>> get bios.uefiBootSettings
BIOS.UefiBootSettings
BIOS.UefiBootSettings.UefiBootSeq
BIOS.UefiBootSettings.UefiPxeIpVersion
NOTE:
In the RACADM autocomplete mode, some of the RACADM commands specific to certain server platforms may not
be available. In such scenarios, execute the RACADM command in the normal execution mode.
Lifecycle Controller Log
Lifecycle Controller logs provide the history of changes related to components installed on a managed system. You can also add
work notes to each log entry.
The following events and activities are logged:
12
Introduction