Users Guide

NOTE: The LOM option can be selected only of the card supports OS to iDRAC pass-through capability. Else, this

option is grayed-out.

3 If you select LOM as the pass-through conguration, and if the server is connected using dedicated mode, enter the IPv4 address of

the operating system.

NOTE: If the server is connected in shared LOM mode, then the OS IP Address eld is disabled.

If you select USB NIC as the pass-through conguration, enter the IP address of the USB NIC.

The default value is 169.254.0.1. However, if this IP address conicts with an IP address of other interfaces of the host system or the

local network, you must change it. Do not enter 169.254.0.3 and 169.254.0.4 IPs. These IPs are reserved for the USB NIC port on the

front panel when a A/A cable is used

5 Click Back, click Finish, and then click Yes.

The details are saved.

Obtaining certicates

The following table lists the types of certicates based on the login type.

Table 14. Types of certicate based on login type

Single Sign-on using Active Directory Trusted CA certicate Generate a CSR and get it signed from a

Certicate Authority

SHA-2 certicates are also supported.

Smart Card login as a local or Active

Directory user

• User certicate

• Trusted CA certicate

• User Certicate — Export the smart

card user certicate as Base64-encoded

le using the card management software

provided by the smart card vendor.

• Trusted CA certicate — This certicate

is issued by a CA.

SHA-2 certicates are also supported.

Active Directory user login Trusted CA certicate This certicate is issued by a CA.

SHA-2 certicates are also supported.

Local User login SSL Certicate Generate a CSR and get it signed from a

trusted CA

NOTE: iDRAC ships with a default

self-signed SSL server certicate.

The iDRAC Web server, Virtual

Media, and Virtual Console use this

certicate.

SHA-2 certicates are also supported.