Users Guide
Category Manufacturer Type
Qlogic QMD8262 Blade NDC
In-built LOM cards also support the OS to iDRAC pass-through feature.
The following cards do not support the OS to iDRAC Pass-through feature:
• Intel 10 GB NDC.
• Intel rNDC with two controllers – 10G controllers does not support.
• Qlogic bNDC
• PCIe, Mezzanine, and Network Interface Cards.
Supported operating systems for USB NIC
The operating systems supported for USB NIC are:
• Windows Server 2008 R2 SP1
• Windows Server 2008 SP2 (64-bit)
• Windows Server 2012
• Windows Server 2012 R2
• SUSE Linux Enterprise Server 10 SP4 (64-bit)
• SUSE Linux Enterprise Server 11 SP2 (64-bit)
• SUSE Linux Enterprise Server 11 SP4
• RHEL 5.9 (32-bit and 64-bit)
• RHEL 6.4
• RHEL 6.7
• vSphere v5.0 U2 ESXi
• vSphere v5.1 U3
• vSphere v5.1 U1 ESXi
• vSphere v5.5 ESXi
• vSphere v5.5 U3
• vSphere 6.0
• vSphere 6.0 U1
• CentOS 6.5
• CentOS 7.0
• Ubuntu 14.04.1 LTS
• Ubuntu 12.04.04 LTS
• Debian 7.6 (Wheezy)
• Debian 8.0
On servers with Windows 2008 SP2 64-bit operating system, the iDRAC Virtual CD USB Device is not discovered automatically (or
enabled). You must enable this manually. For more information, see steps recommended by Microsoft to manually update the Remote
Network Driver Interface Specication (RNDIS) driver for this device.
For Linux operating systems, congure the USB NIC as DHCP on the host operating system before enabling USB NIC.
If the operating system on the host is SUSE Linux Enterprise Server 11, CentOS 6.5, CentOS 7.0, Ubuntu 14.04.1 LTS, or Ubuntu 12.04.4 LTS
then after enabling the USB NIC in iDRAC, you must manually enable DHCP client on the host operating system. For information to enable
DHCP, see the documents for SUSE Linux Enterprise Server, CentOS, and Ubuntu operating systems.
For vSphere, you must install the VIB le before enabling USB NIC.
96
Conguring iDRAC