Users Guide

Enabling FIPS mode using RACADM

Use RACADM CLI to execute the following command:

racadm set iDRAC.Security.FIPSMode <Enable>

Disabling FIPS mode

To disable FIPS mode, you must reset iDRAC to the factory-default settings.

Conguring services

You can congure and enable the following services on iDRAC:

Local Conguration Disable access to iDRAC conguration (from the host system) using Local RACADM and iDRAC Settings utility.

Web Server Enable access to iDRAC web interface. If you disable the web interface, remote RACADM also gets disabled. Use

local RACADM to re-enable the web server and remote RACADM.

SSH Access iDRAC through rmware RACADM.

Telnet Access iDRAC through rmware RACADM.

Remote RACADM Remotely access iDRAC.

Redsh Enables support for Redsh RESTful API.

SNMP Agent Enables support for SNMP queries (GET, GETNEXT, and GETBULK operations) in iDRAC.

Automated System

Recovery Agent

Enable Last System Crash Screen.

VNC Server Enable VNC server with or without SSL encryption.

Conguring services using web interface

To congure the services using iDRAC Web interface:

1 In the iDRAC Web interface, go to Overview > iDRAC Settings > Network > Services.

The Services page is displayed.

2 Specify the required information and click Apply.

For information about the various settings, see the iDRAC Online Help.

NOTE

: Do not select the Prevent this page from creating additional dialogs check-box. Selecting this option prevents

you from conguring services.

Conguring services using RACADM

To enable and congure services using RACADM, use the set command with the objects in the following object groups:

• iDRAC.LocalSecurity

• iDRAC.SSH

Conguring

iDRAC 87