Users Guide
CMC settings to update CMC rmware from iDRAC
In the PowerEdge FX2/FX2s chassis, before performing the rmware update from iDRAC for CMC and its shared components, do the
following:
1 Launch the CMC Web interface
2 Navigate to Chassis Overview > Setup > General.
3 From the Chassis Management at Server Mode drop-down menu, select Manage and Monitor, and the click Apply.
iDRAC settings to update CMC rmware
In the PowerEdge FX2/FX2s chassis, before updating the rmware for CMC and its shared components from iDRAC, do the following
settings in iDRAC:
1 In the iDRAC Web interface, go to Overview > iDRAC Settings > Update and Rollback > Settings
The Chassis Management Controller Firmware Update Settings page is displayed.
2 For Allow CMC Updates Through OS and Lifecycle Controller, select Enabled to enable CMC rmware update from iDRAC.
3 Under Current CMC Setting, make sure that Chassis Management at Server Mode option displays Manage and Monitor. You can
set this in CMC.
Viewing and managing staged updates
You can view and delete the scheduled jobs including conguration and update jobs. This is a licensed feature. All jobs queued to run during
the next reboot can be deleted.
Related link
Updating device rmware
Viewing and managing staged updates using iDRAC web
interface
To view the list of scheduled jobs using iDRAC web interface, go to Overview > Server > Job Queue. The Job Queue page displays the
status of jobs in the Lifecycle Controller job queue. For information about the displayed elds, see the
iDRAC Online Help.
To delete job(s), select the job(s) and click Delete. The page is refreshed and the selected job is removed from the Lifecycle Controller job
queue. You can delete all the jobs queued to run during the next reboot. You cannot delete active jobs, that is, jobs with the status Running
or Downloading.
You must have Server Control privilege to delete jobs.
Viewing and managing staged updates using RACADM
To view the staged updates using RACADM, use jobqueue sub-command. For more information, see the iDRAC RACADM Command Line
Interface Reference Guide available at dell.com/idracmanuals.
74
Setting up managed system and management station