Users Guide
For more information on the Auto Cong feature, see the Zero-Touch Bare Metal Server Provisioning using Dell iDRAC with Lifecycle
Controller Auto Cong white paper available at the delltechcenter.com/idrac.
Using hash passwords for improved security
You can set user passwords and BIOS passwords using a one-way hash format. The user authentication mechanism is not aected (except
for SNMPv3 and IPMI) and you can provide the password in plain text format.
With the new password hash feature:
• You can generate your own SHA256 hashes to set iDRAC user passwords and BIOS passwords. This allows you to have the SHA256
values in the server conguration prole, RACADM, and WSMAN. When you provide the SHA256 password values, you cannot
authenticate through SNMPv3 and IPMI.
• You can set up a template server including all the iDRAC user accounts and BIOS passwords using the current plain text mechanism.
After the server is set up, you can export the server conguration prole with the password hash values. The export includes the hash
values required for SNMPv3 authentication. Importing this prole results in losing the IPMI authentication for users who have the
hashed password values set and the F2 IDRAC interface shows that the user account is disabled.
• The other interfaces such as IDRAC GUI will show the user accounts enabled.
NOTE: When downgrading a Dell 12th generation PowerEdge server from version 2.xx.xx.xx to 1.xx.xx, if the server is set with
hash authentication, then you will not be able to log in to any interface unless the password is set to default.
You can generate the hash password with and without Salt using SHA256.
You must have Server Control privileges to include and export hash passwords.
If access to all accounts is lost, use iDRAC Settings Utility or local RACADM and perform reset iDRAC to default task.
If the password of the iDRAC user account is set with the SHA256 password hash only and not the other hashes (SHA1v3Key or
MD5v3Key), then authentication through SNMP v3 is not available.
Hash password using RACADM
To set hash passwords, use the following objects with the set command:
• iDRAC.Users.SHA256Password
• iDRAC.Users.SHA256PasswordSalt
Use the following command to include the hash password in the exported server conguration prole:
racadm get -f <file name> -l <NFS / CIFS share> -u <username> -p <password> -t <filetype> --
includePH
You must set the Salt attribute when the associated hash is set.
NOTE
: The attributes are not applicable to the INI conguration le.
Hash password in server conguration prole
The new hash passwords can be optionally exported in the server conguration prole.
When importing server conguration prole, you can uncomment the existing password attribute or the new password hash attribute(s). If
both are uncommented an error is generated and the password is not set. A commented attribute is not applied during an import.
52
Setting up managed system and management station