Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManageriDRAC7/8 with Lifecycle Controller Version 2.50.50.50
311312313314315316317318319320
Resetting iDRAC to factory default settings using iDRAC web
interface
To reset iDRAC to factory default settings using the iDRAC Web interface:
1 Go to Overview > Server > Troubleshooting > Diagnostics.
The Diagnostics Console page is displayed.
2 Click Reset iDRAC to Default Settings.
The completion status is displayed in percentage. iDRAC reboots and is restored to factory defaults. The iDRAC IP is reset and is not
accessible. You can congure the IP using the front panel or BIOS.
Resetting iDRAC to factory default settings using iDRAC
settings utility
To reset iDRAC to factory default values using the iDRAC Settings utility:
1 Go to Reset iDRAC congurations to defaults.
The iDRAC Settings Reset iDRAC congurations to defaults page is displayed.
2 Click Yes.
iDRAC reset starts.
3 Click Back and navigate to the same Reset iDRAC congurations to defaults page to view the success message.
314
Troubleshooting managed system using iDRAC