Users Guide

• Read-write access – Allows you to congure the basic iDRAC settings.
• Read-only access – Allows you to view inventory and monitoring information.
• Disabled access – Does not allow you to view information and congure settings.
• Time-out — You can enable or disable iDRAC Quick Sync inactivity timer:
• If enabled, you can specify a time after which the Quick Sync mode is turned o. To turn on, press the activation button again.
• If disabled, the timer does not allow you to enter a time-out period.
• Time-out Limit — Allows you specify the time after which the Quick Sync mode is disabled. The default value is 30 seconds.
You must have Server Control privilege to congure the settings. A server reboot is not required for the settings to take eect.
An entry is logged to the Lifecycle Controller log when the conguration is modied.
Conguring iDRAC Quick Sync settings using web interface
To congure iDRAC Quick Sync:
1 In the iDRAC web interface, go to Overview > Hardware > Front Panel.
2 In the iDRAC Quick Sync section, from the Access drop-down menu, select one of the following to provide access to the Android
mobile device:
• Read-write
• Read-only
• Disabled
3 Enable the Timer.
4 Specify the Timeout value.
For more information about the elds, see the iDRAC Online Help.
5 Click Apply to apply the settings.
Conguring iDRAC Quick Sync settings using RACADM
To congure the iDRAC Quick Sync feature, use the racadm objects in the System.QuickSync group. For more information, see the iDRAC
RACADM Command Line Reference Guide available at dell.com/idracmanuals.
Conguring iDRAC Quick Sync settings using iDRAC settings
utility
To congure iDRAC Quick Sync:
1 In the iDRAC Settings Utility, go to Front Panel Security.
The iDRAC Settings Front Panel Security page is displayed.
2 In the iDRAC Quick Sync section:
• Specify the access level.
• Enable Timeout.
• Specify the User Dened Timeout Limit (15 seconds to 3600 seconds).
For more information about the elds, see the iDRAC Online Help.
3 Click Back, click Finish, and then click Yes.
The settings are applied.
Using iDRAC Quick Sync
297