Users Guide

NOTE: If the attached vFlash partition(s) are not listed in the First Boot Device drop-down menu, make sure that the BIOS is
updated to the latest version.
Booting to a partition using RACADM
To set a vFlash partition as the rst boot device, use the iDRAC.ServerBoot object.
For more information, see the iDRAC RACADM Command Line Interface Reference Guide available at dell.com/idracmanuals.
NOTE: When you run this command, the vFlash partition label is automatically set to boot once
(iDRAC.ServerBoot.BootOnce is set to 1.) Boot once boots the device to the partition only once and does not keep it
persistently rst in the boot order.
272 Managing vFlash SD card