Users Guide

3 Click OK.
The selected partition is formatted to the specied le system type. An error message is displayed if:
• The card is write-protected.
• An initialize operation is already being performed on the card.
Viewing available partitions
Make sure that the vFlash functionality is enabled to view the list of available partitions.
Viewing available partitions using web interface
To view the available vFlash partitions, in the iDRAC Web interface, go to Overview > Server > vFlash > Manage. The Manage Partitions
page is displayed listing the available partitions and related information for each partition. For information on the partitions, see the iDRAC
Online Help.
Viewing available partitions using RACADM
To view the available partitions and their properties using RACADM:
1 Open a Telnet, SSH, or Serial console to the system and log in.
2 Enter the following commands:
• To list all existing partitions and its properties:
racadm vflashpartition list
• To get the status of operation on partition 1:
racadm vflashpartition status -i 1
• To get the status of all existing partitions:
racadm vflashpartition status -a
NOTE
: The -a option is valid only with the status action.
Modifying a partition
You can change a read-only partition to read-write or vice-versa. Before modifying the partition, make sure that:
• The vFlash functionality is enabled.
• You have Access Virtual Media privileges.
NOTE
: By default, a read-only partition is created.
Modifying a partition using web interface
To modify a partition:
1 In the iDRAC Web interface, go to Overview > Server > vFlash > Manage.
The Manage Partitions page is displayed.
2 In the Read-Only column:
• Select the checkbox for the partition(s) and click Apply to change to read-only.
268
Managing vFlash SD card