Users Guide

Table 37. PERC Capability
PERC Capability CEM conguration Capable Controller
(PERC 9.1 or later)
CEM conguration Non-capable Controller
(PERC 9.0 and lower)
Real-time If there is no existing pending or scheduled
jobs for the controller, then conguration is
applied.
If there are pending or scheduled jobs for
that controller, then the jobs have to be
cleared or you must wait for the jobs to be
completed before applying the conguration
at run-time. Run-time or real-time means, a
reboot is not required.
Conguration is applied. An error message is
displayed. Job creation is not successful and
you cannot create real-time jobs using Web
interface.
Staged If all the set operations are staged, the
conguration is staged and applied after
reboot or it is applied at real-time.
Conguration is applied after reboot
Topics:
• Understanding RAID concepts
• Supported controllers
• Supported enclosures
• Summary of supported features for storage devices
• Inventorying and monitoring storage devices
• Viewing storage device topology
• Managing physical disks
• Managing virtual disks
• Managing controllers
• Managing PCIe SSDs
• Managing enclosures or backplanes
• Choosing operation mode to apply settings
• Viewing and applying pending operations
• Storage devices — apply operation scenarios
• Blinking or unblinking component LEDs
Related link
Understanding RAID concepts
Inventorying and monitoring storage devices
Viewing storage device topology
Managing controllers
Managing physical disks
Managing enclosures or backplanes
Managing PCIe SSDs
Managing virtual disks
Blinking or unblinking component LEDs
Supported controllers
Supported enclosures
Summary of supported features for storage devices
Managing storage devices
197