Users Guide
For more information, see the iDRAC RACADM Command Line Interface Reference Guide available at dell.com/idracmanuals.
iSCSI initiator and storage target default values
The following tables provide the list of default values for iSCSI initiator and storage targets when the persistence policies are cleared.
Table 35. iSCSI initiator —default values
iSCSI Initiator Default Values in IPv4 mode Default Values in IPv6 mode
IscsiInitiatorIpAddr 0.0.0.0 ::
IscsiInitiatorIpv4Addr 0.0.0.0 0.0.0.0
IscsiInitiatorIpv6Addr :: ::
IscsiInitiatorSubnet 0.0.0.0 0.0.0.0
IscsiInitiatorSubnetPrex 0 0
IscsiInitiatorGateway 0.0.0.0 ::
IscsiInitiatorIpv4Gateway 0.0.0.0 0.0.0.0
IscsiInitiatorIpv6Gateway :: ::
IscsiInitiatorPrimDns 0.0.0.0 ::
IscsiInitiatorIpv4PrimDns 0.0.0.0 0.0.0.0
IscsiInitiatorIpv6PrimDns :: ::
IscsiInitiatorSecDns 0.0.0.0 ::
IscsiInitiatorIpv4SecDns 0.0.0.0 0.0.0.0
IscsiInitiatorIpv6SecDns :: ::
IscsiInitiatorName Value Cleared Value Cleared
IscsiInitiatorChapId Value Cleared Value Cleared
IscsiInitiatorChapPwd Value Cleared Value Cleared
IPVer Ipv4
Table 36. Iscsi storage target attributes — default values
iSCSI Storage Target Attributes Default Values in IPv4 mode Default Values in IPv6 mode
ConnectFirstTgt Disabled Disabled
FirstTgtIpAddress 0.0.0.0 ::
FirstTgtTcpPort 3260 3260
194 Inventorying, monitoring, and conguring network devices