Users Guide

Conguring power supply options using iDRAC settings utility
To congure the power supply options:
1 In iDRAC Settings utility, go to Power Conguration.
NOTE: The Power Conguration link is available only if the server power supply unit supports power
monitoring.
The iDRAC Settings Power Conguration page is displayed.
2 Under Power Supply Options:
• Enable or disable power supply redundancy.
• Enable or disable hot spare.
• Set the primary power supply unit.
• Enable or disable power factor correction. For more information about the options, see the iDRAC Settings Utility Online Help.
3 Click Back, click Finish, and then click Yes.
The power supply options are congured.
Enabling or disabling power button
To enable or disable the power button on the managed system:
1 In iDRAC Settings utility, go to Front Panel Security.
The iDRAC Settings Front Panel Security page is displayed.
2 Select Enabled to enable the power button or Disabled to disable it.
3 Click Back, click Finish, and then click Yes.
The settings are saved.
Monitoring and managing power
185