Users Guide

Conguring iDRAC SSO login for Active Directory users using
RACADM
To enable SSO, complete the steps to congure Active Directory, and run the following command:
racadm set iDRAC.ActiveDirectory.SSOEnable 1
Conguring iDRAC smart card login for local users
To congure iDRAC local user for smart card login:
1 Upload the smart card user certicate and trusted CA certicate to iDRAC.
2 Enable smart card login.
Related link
Obtaining certicates
Uploading smart card user certicate
Enabling or disabling smart card login
Uploading smart card user certicate
Before you upload the user certicate, make sure that the user certicate from the smart card vendor is exported in Base64 format. SHA-2
certicates are also supported.
Related link
Obtaining certicates
Uploading smart card user certicate using web interface
To upload smart card user certicate:
1 In iDRAC Web interface, go to Overview > iDRAC Settings > Network > User Authentication > Local Users.
The Users page is displayed.
2 In the User ID column, click a user ID number.
The Users Main Menu page is displayed.
3 Under Smart Card Congurations, select Upload User Certicate and click Next.
The User Certicate Upload page is displayed.
4 Browse and select the Base64 user certicate, and click Apply.
Uploading smart card user certicate using RACADM
To upload smart card user certicate, use the usercertupload object. For more information, see the iDRACRACADM Command Line
Interface Reference Guide available at dell.com/idracmanuals.
160
Conguring iDRAC for Single Sign-On or smart card login