Users Guide

For information about the options, see the iDRAC Online Help.
The IPMI over LAN settings are congured.
Conguring IPMI over LAN using iDRAC settings utility
To congure IPMI over LAN:
1 In the iDRAC Settings Utility, go to Network.
The iDRAC Settings Network page is displayed.
2 For IPMI Settings, specify the values.
For information about the options, see the iDRAC Settings Utility Online Help.
3 Click Back, click Finish, and then click Yes.
The IPMI over LAN settings are congured.
Conguring IPMI over LAN using RACADM
1 Enable IPMI over LAN.
racadm set iDRAC.IPMILan.Enable 1
NOTE
: This setting determines the IPMI commands that are executed using IPMI over LAN interface. For more
information, see the IPMI 2.0 specications at intel.com.
2 Update the IPMI channel privileges.
racadm set iDRAC.IPMILan.PrivLimit <level>
Parameter
Privilege level
<level> = 2 User
<level> = 3 Operator
<level> = 4 Administrator
3 Set the IPMI LAN channel encryption key ,if required.
racadm set iDRAC.IPMILan.EncryptionKey <key>
Parameter
Description
<key> 20-character encryption key in a valid hexadecimal format.
NOTE: The iDRAC IPMI supports the RMCP+ protocol. For more information, see the IPMI 2.0 specications at
intel.com.
Enabling or disabling remote RACADM
You can enable or disable remote RACADM using the iDRAC Web interface or RACADM. You can run up to ve remote RACADM sessions
in parallel.
NOTE
: Remote RACADM is enabled by default.
Enabling or disabling remote RACADM using web interface
1 In iDRAC Web interface, go to Overview > iDRAC Settings > Network > Services.
2 Under Remote RACADM, select the desired option and click Apply.
126
Setting up iDRAC communication