Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManageriDRAC7/8 with Lifecycle Controller Version 2.50.50.50
101102103104105106107108109110
For more information, see the iDRAC RACADM Command Line Interface Reference Guide available at dell.com/idracmanuals.
Uploading custom signing certicate
You can upload a custom signing certicate to sign the SSL certicate. SHA-2 certicates are also supported.
Uploading custom signing certicate using web interface
To upload the custom signing certicate using iDRAC web interface:
1 Go to Overview > iDRAC Settings > Network > SSL.
The SSL page is displayed.
2 Under Custom SSL Certicate Signing Certicate, select Upload Custom SSL Certicate Signing Certicate and click Next.
The Upload Custom SSL Certicate Signing Certicate page is displayed.
3 Click Browse and select the custom SSL certicate signing certicate le.
Only Public-Key Cryptography Standards #12 (PKCS #12) compliant certicate is supported.
4 If the certicate is password protected, in the PKCS#12 Password eld, enter the password.
5 Click Apply.
The certicate is uploaded to iDRAC.
6 A pop-up message is displayed asking you to reset iDRAC immediately or at a later time. Click Reset iDRAC or Reset iDRAC Later as
required.
After iDRAC resets, the new certicate is applied. The iDRAC is not available for a few minutes during the reset.
NOTE
: You must reset iDRAC to apply the new certicate. Until iDRAC is reset, the existing certicate is
active.
Uploading custom SSL certicate signing certicate using RACADM
To upload the custom SSL certicate signing certicate using RACADM, use the sslcertupload command, and then use the racreset
command to reset iDRAC.
For more information, see the iDRAC RACADM Command Line Reference Guide available at www.dell.com/idracmanuals.
Downloading custom SSL certicate signing certicate
You can download the custom signing certicate using iDRAC Web interface or RACADM.
Downloading custom signing certicate
To download the custom signing certicate using iDRAC Web interface:
1 Go to Overview > iDRAC Settings > Network > SSL.
The SSL page is displayed.
2 Under Custom SSL Certicate Signing Certicate, select Download Custom SSL Certicate Signing Certicate and click Next.
A pop-up message is displayed that allows you to save the custom signing certicate to a location of your choice.
Conguring
iDRAC 103