Release Notes

iDRAC6 v2.90.04 8
Resolution
There is no patch for this vulnerability it is an inherent problem with the specification for IPMI v2.0. Suggested
mitigations include:
• Disabling IPMI over LAN if it is not needed.
• Using strong passwords to limit the successfulness of off-line dictionary attacks.
• Using Access Control Lists (ACLs) or isolated networks to limit access to your IPMI management
interfaces.
Versions/Systems affected
All iDRAC6 supported Dell PowerEdge systems.
Issue 15
Description
Telnet session is not getting cleared from ssninfo even after closing the session
Resolution
Manually delete the telnet session from GUI Session management
Versions/Systems affected
All iDRAC6 supported Dell PowerEdge systems.
Issue 16
Description
Health status is reported as critical when OS is shutdown
Resolution
If there are any critical events in SEL logs, SEL logs needs to be cleared. If SEL logs are cleared, health status is
reported as expected.
Versions/Systems affected
All iDRAC6 supported Dell PowerEdge systems.
Limitations
None for this release.
Installation
Installation and Configuration Notes
For more information about iDRAC6, including installation and configuration information, see the Integrated Dell
Remote Access Controller 6 (iDRAC6) Enterprise Version 1.95 User Guide and the Dell OpenManage Server
Administrator User's Guide. These documents are located on the Dell Support website at dell.com/support/manuals.
Upgrade
Upgrading from iDRAC6 versions 2.85 to 2.90.
Uninstallation
• Use the rollback feature to uninstall iDRAC6 version 2.80.
• System purchased with new eMMC cards and 1.80 iDRAC6 firmware version, firmware downgrades are not
allowed to lower version.
• On certain hardware configurations, based on the firmware release, firmware downgrades are not allowed.