Release Notes

Issue 10
Description
When the Certificate Authority (CA) is enabled, the Domain Controller (DC) is specified as FQDN and Global
Catalog (GC) as IP address, the authentication using Test Settings fails and normal login succeeds. The
expected behavior is the authentication using Test Settings must succeed by using DC FQDN.
Resolution
Specify the FQDN for GC.
Versions/Systems Affected
All iDRAC6 supported Dell PowerEdge systems.
Issue 11
Description
SSH server takes more time to establish a connection from putty client.
Resolution
For improving the performance, change the order of the key exchange algorithm in Putty SSH configuration:
1. Open Putty.
2. Expand SSH tab.
3. Click Kex.
4. Change the order in the Algorithm selection policy window.
5. Connect to the SSH server. The connection is established.
Versions/Systems Affected
All iDRAC6 supported Dell PowerEdge systems.
Issue 12:
Description
In a system with Microsoft Windows Server 2012 R2 and Dell OpenManage 7.4, the operating system name
may not appear on the iDRAC6 web interface and RACADM. This is an intermittent issue.
Resolution
View the operating system name from the Dell OpenManage Server Administrator installed on the host
system.
Versions/Systems Affected
All iDRAC6 supported Dell PowerEdge systems.
Issue 13:
Description
Afer updating Lifecycle Controller using the Remote Enablement (RE) Services, the Lifecycle Controller
version is not updated in the System Summary page in the iDRAC web interface.
Resolution
Reboot iDRAC to view the updated Lifecycle Controller version.
Versions/Systems Affected
All iDRAC6 supported Dell PowerEdge systems.
Limitations
None for this release.