Release Notes

To add a temporary exception to allow access to the page:
When you access the iDRAC page, an “Untrusted” error message is displayed.
1.
Click I Understand the Risks .
2.
Click Add Exception... . The Add Security Exception window is displayed.
3.
Click Get Certificate to display the certificate in the Certificate Status section.
4.
Clear the Permanently store this exception option.
5.
Click Confirm Security Exception . The Add Security Exception window is closed.
The iDRAC page is displayed.
Versions/Systems Affected
All iDRAC6 supported Dell PowerEdge systems.
Issue 10
Description
When the Certificate Authority (CA) is enabled, the Domain Controller (DC) is specified as FQDN and Global Catalog (GC) as
IP address, the authentication using Test Settings fails and normal login succeeds. The expected behavior is the
authentication using Test Settings must succeed by using DC FQDN.
Resolution
Specify the FQDN for GC.
Versions/Systems Affected
All iDRAC6 supported Dell PowerEdge systems.
Issue 11
Description
SSH server takes more time to establish a connection from putty client.
Resolution
For improving the performance, change the order of the key exchange algorithm in Putty SSH configuration:
1.
Open Putty.
2.
Expand SSH tab.
3.
Click Kex .
4.
Change the order in the Algorithm selection policy window.
5.
Connect to the SSH server. The connection is established.
Versions/Systems Affected
All iDRAC6 supported Dell PowerEdge systems.
Limitations
None for this release.