Release Notes

Integrated Dell Remote Access Controller6 (iDRAC6) is a systems management hardware and software
solution that provides remote management capabilities, crashed system recovery, and power control
functions for the Dell PowerEdge systems
.
What’s New
• Regular Maintenance
• Open source components upgraded(openssl, openldap, libxml)
• Thermal improvement for DR4000 PCI card
• Added New racadm command support for setting ssl Encryption Strength
• Enabled iDRAC support for the Qlogic P3+ Dual port 10Gb SFP+/DA on R715, R815 and R910
• Enabled iDRAC support for the Broadcom 57810 Dual Port 10Gb Base-T-CAN on R715, R815 and R910
• Enabled iDRAC support for the Broadcom 57810 Dual Port 10GbE SFP+
• Converged Network Adapter on R715, R815 and R910
• Enabled iDRAC support for setting Power Supply upper non critical threshold through OMSA and IPMI cmd.
• Enabled iDRAC support for the Emulex LPe16000 Single Port FC16 HBA
• Enabled iDRAC support for the Emulex LPe16002 Dual Port FC16 HBA
• Added the following new racadm commands:
o racadm sslEncryptionStrength get
Returns the current encryption strength setting on iDRAC.
Legal values: 0 or 1 (0= auto negotiate, 1= 128-bit or higher)
o racadm sslEncryptionStrength [set <value>] [--webserverrestart]
Sets the encryption strength on iDRAC.
webserverrestart and set <value > are optional. [--webserverrestart] applies the changes.
<value>: 0 or 1, (0 = auto negotiate, 1 = 128-bit or higher) None
Hardware and Software Requirements
Supported Systems
iDRAC6 is supported on the following Dell PowerEdge systems:
• DELL PowerEdge R710
• DELL PowerEdge R815
• DELL PowerEdge T410
• DELL PowerEdge R715
• DELL PowerEdge R210
• DELL PowerEdge R510
• DELL PowerEdge T310
• DELL PowerEdge R910
• DELL PowerEdge R310
• DELL PowerEdge R415
• DELL PowerEdge R515
• DELL PowerEdge T610
• DELL PowerEdge R610
• DELL PowerEdge R410
• DELL PowerEdge R810
• DELL PowerEdge T710
• DELL PowerEdge R210 II
• DELL PowerVault DR6000