Reference Guide

iDRAC6 Property Database Group and Object Definitions 83
cfgNicVLanEnable (Read/Write)
NOTE: For iDRAC6 Enterprise on Blade Servers, this object is read-only and VLAN
settings can be configured through CMC Web Interface. iDRAC6 displays only the
current VLAN settings and you cannot modify the settings from iDRAC6.
cfgNicVLanId (Read/Write)
Shared with Failover All
LOMs
Enables teaming capabilities between all LOMs on the
host server integrated network interface controllers.
The remote access device network interface is fully
functional when the host operating system is configured
for NIC teaming. The remote access device receives data
through NIC 1 and NIC 2, but transmits data only
through NIC 1.
Failover occurs from NIC 2 to NIC 3 and then to NIC 4.
If NIC 4 fails, the remote access device fails over all data
transmission back to NIC 1, but only if the original NIC
1 failure has been corrected.
Description Enables or disables the VLAN capabilities of the RAC/BMC.
NOTE: For iDRAC6 Enterprise on Blade Servers, this object enables
or disables the VLAN capabilities of iDRAC6 from CMC.
Legal Values 1 (TRUE)
0 (FALSE)
Default 0
Description Specifies the VLAN ID for the network VLAN configuration (in
CMC for iDRAC6 Enterprise on Blade Servers). This property is only
valid if cfgNicVLanEnable is set to 1 (enabled).
Legal Values 1-4094
Default 1
Table 3-2. cfgNicSelection Supported Modes
(continued)
Mode Description (continued)