Reference Guide

iDRAC6 Property Database Group and Object Definitions 77

iDRAC6 Property Database Group

and Object Definitions

The iDRAC6 property database contains the configuration information for

iDRAC6. Data is organized by associated object, and objects are organized by

object group. The IDs for the groups and objects that the property database

supports are listed in this section for iDRAC6 Enterprise on Blade Servers and

iDRAC6 Enterprise or Express on Rack and Tower Servers.

Use the group and object IDs with the RACADM subcommands to configure

the iDRAC6.

Table 3-1 provides an overview of the object groups applicable for iDRAC6

Enterprise on Blade Servers and iDRAC6 on Rack and Tower Servers.

CAUTION: Racadm sets the value of objects without performing any functional

validation on them. For example, RACADM allows you to set the Certificate

Validation object to 1 with the Active Directory object set to 0, even though

Certificate Validation can happen only if Active Directory is enabled. Similarly, the

cfgADSSOEnable object can be set to 0 or 1 even if the cfgADEnable object is 0,

but it will take effect only if Active Directory is enabled.

All string values are limited to displayable ASCII characters, except where

otherwise noted.

Displayable Characters

Displayable characters include the following set:

abcdefghijklmnopqrstuvwxwz

ABCDEFGHIJKLMNOPQRSTUVWXYZ

0123456789~`!@#$%^&*()_+-={}[]|\:";'<>,.?/