Reference Guide

RACADM Subcommand Details 73
Options
Table 2-26 describes the sslcertview subcommand options.
Table 2-26. vflashpartition Subcommand Options
Option Description
-i <index> Index of the partition for which this command applies.
<index> must be an integer from 1 to 16.
NOTE: For the standard SD card, the index value is 1 because only one
partition of size 256 MB is supported.
Options valid only with create action
-o <label> Label that is displayed when the partition is mounted on the
operating system.
<label> must be a string up to six alphanumeric characters.
-e <type> Emulation type for the partition. <type> must be floppy, cddvd, or
HDD.
-t <type> Create a partition of type <type>. <type> must be:
• empty – Create an empty partition. The following options are valid
with the empty type:
• -s <size> – Partition size in MB.
•-f <type> –
Format type for the partition based on the type of
file system. Valid options are RAW, FAT16, FAT32, EXT2, or
EXT3.
• image – Create a partition using an image relative to the iDRAC.
The following options are valid with the image type:
• -l <path> – Specifies the remote path relative to the iDRAC. The
path can be on a mounted drive:
SMB path: //<ip or domain>/<share_name> /<path_to_image>
NFS path: <ipaddress>:/<path_to_image>
• -u <user> – Username for accessing the remote image.
• -p <password> – Password for accessing the remote image.
Options valid only with status action
-a Displays the status of operations on all existing partitions.