Reference Guide

RACADM Subcommand Details 55
Table 2-12 describes the remoteimage subcommand options.
serveraction
NOTE: To use this subcommand, you must have Execute Server Control Commands
permission.
Synopsis
racadm serveraction <action>
Description
The serveraction subcommand enables users to perform power management
operations on the host system. Table 2-13 describes the serveraction power
control options.
Table 2-12. remoteimage Subcommand Options and Descriptions
Option Description
-c Connect the image.
-d Disconnect image.
-u Username to access the network share.
-p Password to access the network share.
-l Image location on the network share; use double quotes around the
location.
-s Display current status; –a is assumed if not specified
Subcommand Definition
serveraction Executes a managed system reset or power-on/off/cycle.