Reference Guide

RACADM Subcommand Details 51
ping
NOTE: To use this subcommand, you must have Execute Diagnostic Commands or
Configure iDRAC permission.
Synopsis
racadm ping <ipaddress>
ping6
NOTE: To use this subcommand, you must have Execute Diagnostic Commands or
Configure iDRAC6 permission.
Synopsis
racadm ping6 <ipv6address>
Subcommand Definition
ping Verifies that the destination IP address is reachable from the iDRAC6
with the current routing-table contents. A destination IP address is
required. An ICMP echo packet is sent to the destination IP address
based on the current routing-table contents.
Subcommand Definition
ping6 Verifies that the destination IPv6 address is reachable from iDRAC6
with the current routing-table contents. A destination IPv6 address is
required. An ICMP echo packet is sent to the destination IPv6 address
based on the current routing-table contents.