Reference Guide

RACADM Subcommand Details 47
Server 2003
Power Status = OFF
Watchdog Information:
Recovery Action = None
Present countdown value = 0 seconds
Initial countdown value = 0 seconds
Limitations
The Hostname and OS Name fields in the getsysinfo output display accurate
information only if Dell OpenManage Server Administrator is installed on the
managed system. If it is not installed, these fields may be blank or inaccurate.
An exception to this are VMware operating system names, which are
displayed even if Server Administrator is not installed on the managed
system.
gettracelog
NOTE: To use this subcommand, you must have Login to iDRAC permission.
Synopsis
racadm gettracelog -i[-A]
racadm gettracelog [-s <start>] [-c <count>] [--more]
[-A] [-o]
Description
The gettracelog (without the -i option) command reads entries.
The following gettracelog entries are used to read entries:
Command Definition
gettracelog -i Displays the number of entries in the iDRAC6 trace log.
gettracelog Displays the iDRAC6 trace log.