Reference Guide

38 RACADM Subcommand Details
NOTE: If no options are provided, the entire log is displayed.
Output
The default output display shows the record number, time stamp, source, and
description. The timestamp begins at midnight, January 1 and increases until
the system boots. After the system boots, the system’s timestamp is used.
NOTE: For iDRAC6 Enterprise on Blade Servers, the iDRAC6 Log entries for
SystemBoot displayed using the local racadm command racadm getraclog
may not be correctly formatted. For example, some extra characters may be
displayed in the Description field, or the Source field may be empty.
Sample Output
Record: 1
Date/Time: Dec 8 08:10:11
Source: login[433]
Description: root login from 143.166.157.103
getractime
NOTE: To use this subcommand, you must have Login to iDRAC permission.
Synopsis
racadm getractime [-d]
--more Displays one screen at a time and prompts the user to continue (similar to
the UNIX more command).
-o Displays the output in a single line.
-s Specifies the starting record used for the display.
Subcommand Definition
getractime Displays the current time from the remote access controller.
Table 2-5. getraclog Subcommand Options
(continued)
Option Description